How to remove Epoxy from concrete


Home improvement projects involve a lot of mind and brainpower, and redoing your floors is an even bigger headache. Whether you are a do-it-yourselfer or a contractor, at some point you may find yourself in a position where you need to know how to remove epoxy from concrete.

It’s a hard feeling when you find yourself standing in a garage or room that has epoxy floors and you know it’s time to replace it. How difficult would it be to remove it? Can you remove epoxy floors yourself or will you have to hire a professional? will be worth it?

Unfortunately, there isn’t an endless list of methods for removing epoxy from concrete, and most methods require harsh chemicals and heavy equipment. Hiring someone to remove epoxy from concrete is one option, but it’s also possible to save money and do the job yourself. Before deciding which strategy to adopt, it is essential to understand the composition of epoxy floors.

What is epoxy?

Epoxy is made up of two liquid components: resin and hardener. Epoxy paint was all the rage about a decade ago and provides reliable coverage for basement, patio, and garage floors. Hardened lacquer adds a bit of shine and comes in a variety of colors.

The paint acts as an excellent concrete sealer while remaining resistant to tire marks, oil stains, scratches, cracks, peeling, and spills.

How to remove epoxy before it cures?

It’s always best to clean up dirt before it dries and hardens. This is what you need:

Acetone or isopropyl alcohol

Acetone is another product used to lift epoxy coatings. This solvent dissolves quickly and should not be used on large surfaces. Instead, use them to scrub small areas with epoxy paint.

A clean rag and paper towels

The rough texture of the rag or towel can easily clean the epoxy from the floor.

Heat gun

Protecting yourself with a flammable mask, goggles, and gloves, as well as long sleeves, set a heat gun to approximately 90°C, and target the hardened epoxy. Once it starts to soften, you can use a plastic scraper to remove it.

When using epoxy, you should be wearing gloves anyway, so all you have to do is soak a rag in acetone or rubbing alcohol and give the spill area a good rub. Let the liquid in, then wipe off with a dry cloth or paper towel. Sand with the wet and dry abrasive paper if necessary to help it blend with the surrounding area.

How to remove the cures epoxy?

The best way to remove epoxy from a concrete floor once done is to use a tool like a putty knife or chisel and simply scrape it off. If necessary, you can also break the epoxy with a hammer.

However, to avoid damaging the surface, it is best to use a plastic scraper after the epoxy has first softened. It produces vapors that can irritate the eyes and lungs, so caution should be exercised. Wear a mask and goggles, and only do so in a well-ventilated area.

Once you’ve removed the hardened epoxy, you can now use a rag and acetone to clean off any residue. It is especially beneficial for polished concrete floors to restore their natural shine.

Machines that can be used to remove epoxy from concrete

If you know anything about removing epoxy from concrete, you know that your removal options are limited.

Aside from chemicals, machinery access is the next best thing to epoxy resin remover. Before renting any machine, buy earmuffs to protect your hearing. rent a floor grinder

A floor grinder uses an abrasive surface to remove epoxy from a concrete surface. These machines are available to rent at your local home improvement store. Rent a blade grinder attachment with your machine to help you scrape concrete faster.

Using a Steel Shot to Remove Epoxy

Shot blasting machines use high pressure to remove paint from small balls of steel. Shot blasting is beneficial for preparing the surface of a concrete floor for a new epoxy or paint. These machines are available to rent from large hardware stores or hire a flooring company to do it for you.

concrete epoxy sandblasting

A sandblaster simplifies paint removal by using compressed air or steam to shoot sand particles at a surface area at high speed. Small particles begin to wear away the thick epoxy coatings.

These machines are available to rent at your local hardware store. If you decide to use a machine to remove epoxy from concrete, vacuum cleans any remaining dust or particles from the floor.

Scrub the floor with your finger and if white residue appears, use one of the cleaners listed earlier in this article to properly remove and disinfect the concrete.

We appreciate you if you’ve decided to tackle the daunting task of removing epoxy paint from concrete.

This home renovation project is no small feat and requires a lot of preparation, protection, and dedication. Try one of our methods for removing epoxy from concrete for high-quality results.

These were some of the ways that will help you solve the problem of how to remove epoxy from concrete. I hope this will help you clean it perfectly without much of a problem.


Previous articleHow to unclog a double kitchen sink with standing water?
Next articleHow to keep windows from fogging up?