How to cover the air inlet of doors and windows?


With the arrival of winter, the outside temperature drops, while indoors the temperature rises, and indeed much higher. However, sometimes our efforts to maintain a warm temperature in the house can be in vain if we do not have all the basic infrastructure in place. Here is how to cover the air inlet of doors and windows.

Over time, doors and windows wear out and inevitably crack at the ends, allowing not only the heat to escape from the house, but the cold outside as well. To avoid this, you need to cover these gaps effectively. Would you like to know how to do this?

Best ways to cover windows

If you want to know how to cover the air intake in windows, it is important to note that it is best to use an element that can block the air intake. For windows, you can use self-adhesive weather stripping or polyurethane foam.

Self-adhesive weather stripping: The first option is both highly effective and economical. You just need to buy the material, cut it to the right size and glue it next to the edge of the ends where the air gets in when the doors and windows are closed. Remember that they are self adhesive, so you shouldn’t try to get to the area where the adhesive tape is located. There are also self-adhesive foam weather strips for affixing to window profiles to achieve the same effect.

Polyurethane Foam: All you need to do to install this is lay it over the fixed joints of the windows. Some more modern are those that contain flexible or metal tubing, with vinyl tubing that protects the interior from freezing.

With these two techniques, you can cover the air inlets in the windows and thus protect yourself from the cold outside. In addition, it is also a good way to prevent certain insects such as spiders from entering your home that can sneak in through these openings.

How to cover doors

It is also common for heat to escape through the doors of the house, as the wood degrades over time, leaving our house open. There are many ways to cover the wind in these areas, but one of the best is to use a flexible band, such as a windbreak with a brush, which is easy to install, very effective and that facilitates the correct sliding of the doors so that they Don’t get stuck. Feel uncomfortable while opening and closing it.

Brush guards are similar and can be glued or screwed onto the door like the previous ones (the first option is always preferred for ease of installation). They are made of nylon straps and a flexible frame so the door slides smoothly.

One downside: Dirt can accumulate between your strips.

And these two methods allow you to block the door openings so that the temperature of your room is not affected by these imperfections. An easy, fast and safe way to improve your home without spending much money.

If you want to read more articles similar to How to cover the air intakes in windows and doors, we recommend you to visit our Home solutions category.

You can also check out how to clean vinyl windows.

I hope these ways how to cover the air inlet of doors and windows that will help you solve your problem and make your life easy.


Previous articleHow to clean rattan furniture?
Next articleHow to remove moss from concrete surfaces?