How to clean unsealed concrete floors

0

Strong, durable, and classic concrete floors can add depth to an otherwise buried space. If maintained properly it can shine for years that will look really elegant and presentable. Here are some simple ways how to clean unsealed concrete floors.

Homemade Cement Floor Cleaner

For a mild cleaner that won’t affect bare, painted, etched, or sealed concrete floors, a mixture of one-quarter warm water and one-eighth cup dish soap should absorb any dirt adhering to the porous surface.

For heavily soiled floors, a mixture of one-quarter cup baking soda with one-quarter warm water and one-eighth cup dish soap removes dirt, pollen, and dust, along with simple stains. Baking soda also helps remove odors, such as those that can build up on exterior concrete floors.

Raw concrete floor cleaning

The porous nature of concrete naturally attracts dirt if left untreated. Commercial concrete floor cleaners can be used on painted or sealed surfaces as well as untreated surfaces.

Small interior floors can be cleaned by hand or with a mop and bucket. Make sure no cleaning agent is left on the untreated concrete. This causes problems with the sealer, which tends to stain or stick to the concrete slab.

For concrete floors that are outdoors, a pressure washer will reduce the time and effort of cleaning the concrete manually. Dirt can adhere to the uneven, porous surface of a bare concrete floor.

Sealing concrete floor

If the concrete is left untreated, you may want to seal it to prevent accidental staining. To maintain the pristine appearance of a clean concrete floor, a sealer stain or sealer stain helps keep the floor pristine and pristine. Before sealing a concrete floor, it should be thoroughly cleaned with a commercially available cleaner or a mixture of household cleaners.

Test the stain in an inconspicuous area to make sure it interacts well with the concrete and that you like the stain it gives when applied. In one corner of the room, apply a small amount of sealant to the surface of the concrete floor. Work slowly from the floor to the door or entryway.

Some people make the mistake of throwing large puddles of sealant into the center of the floor and working it toward the edges. This increases the chances of bubbles or fine spots on the surface. Always read the sealer or stain manufacturer’s recommendations before pouring the product on a concrete floor.

Check out how to smooth concrete and give it a perfect look.

Etching Concrete With Vinegar

Freshly poured concrete can withstand paint or a protective seal. Washing with an acidic product such as vinegar can open up the pores of a concrete floor. This will cause the product you have chosen to transfer and stick to the concrete.

Acid etching with vinegar is simple and requires less labor than using a machine to pre-treat a concrete floor before sealing or painting. If you are working on an exterior concrete floor, you will need to degrease it. Acid cannot penetrate oily stains and will leave an uneven, uneven floor.

Vinegar contains a solution of about 4 percent acetic acid. Reacts with alkali in concrete.

What not to do

Do not use vinegar to clean bare concrete floors. This commonly used household cleaner can strip concrete and leave unwanted marks. However, this quality makes vinegar a useful tool for those who want to enhance the aesthetic value of a smooth concrete floor with engraved patterns.

It also makes a good candidate for creating subtle patterns on bare concrete floors for those who want to add a little creativity to the floor.

These were the ways how to clean unsealed concrete floors. I hope this will solve your problem. Check out other solutions to home-related problems.

Previous articlehow to get smoke smell out of wood furniture
Next articleHow to clean the concrete basement floor